The WRAPJET system is a combined line for use of film with a heat-shrinking tunnel.
The system can pack single or multiple lines of products.
It is suitable for packaging products with film only, film plus a cardboard divider or film plus a tray.
The (WRAPJET 30) line is only with the application of film – The (WRAPJET 30 F) line is combined with film + cardboard divider -
The (WRAPJET 30 V) line is combined with film + tray.
| Models | WRAPJET 30 | WRAPJET 30 F | WRAPJET 30 V |
|---|---|---|---|
| Maximum reel diameter (mm) | 500 | 500 | 500 |
| Maximum reel width (mm) | 750 | - | - |
| Maximum pack height (mm) | 380 | 380 | 380 |
| Divider size | - | Min 175 x 250 | Min 150 x 200 |
| Tray dimensions | - | Max 450 x 550 | Max 480 x 580 |
| Tunnel infeed dimensions (mm) | 700 x 400H | ||
| Tunnel chamber length (mm) | 2400 | 2400 | 2400 |
| Maximum production per minute | 28 - 30 | 28 - 30 | 28 - 30 |
Main features
- Separator for the incoming product
- Channelling system for rectangular or square products
- Tray formed with a total wrapping system using hot glue
- Switch to enable-disable the insertion of the cardboard sheet
- Option of customising the line based on your product
- Line motion and control with PLC
- Touch-screen operator panel
- Option of dividing the packs into two parallel paths
Options
- Kit of wheels
- Pneumatically lifted dragging roller to apply the film in order to facilitate reel change operations
- Electric winch to lift the upper film reel
- Sealing bar height adapted automatically
- Pneumatic presser for product pressing
- Guides for product containment after the sealing bar
- Side guides to protect the product inside the tunnel
- additional 400 mm of insulated tunnel
- Film presser rollers
- Photocells at the tunnel outfeed to accumulate packs and prevent them from being blocked inside it
- Section of the conveyor with thick rollers and positioned below the pack cooling unit at the tunnel outfeed. This system is ideal for a good combination of products